ConnectGear WA540G - Manual (Page 32)

Wireless LAN Access Point Configuration
31
Parameter Description
Enable Radius Server Select to enable the RADIUS server.
User Profile table This table records the accounts of users you want to allow to access your
wireless network. An account includes the “User name” and “Password”.
A wireless LAN user has to enter correct “Username” and “Password”
before he/she is allowed to access the wireless LAN.
Add an user account Fill in the “Username”, “Password” and “Re-Type Password” of the new
account to be added and then click “Add”. Then this new account will be
added into the account table below. If you find any typo before adding it
and want to retype again. Just click “Reset” and “Username”, “Password”
and “Re-Type Password” fields will be cleared.
Remove user account from
the table
If you want to remove some account from the table, select the accounts
you want to remove in the table and then click “Delete Selected”. If you
want remove all user accounts from the table, just click “Delete All”
button.
Reset Click “Reset” will clear your current selections.
Authentication Client table This table records the clients of the RADIUS server that need to
authenticate wireless LAN users. Authentication client information
includes the “Client IP” and “Secret Key”. An authentication client has to
use the “Secret Key” to login to the RADIUS server before it can start to
authenticate wireless LAN users. An authentication client can be an
access point.
Add an authentication client Fill in the “Client IP”, “Secret Key” and “Re-Type Secret Key” of the new
authentication client to be added and then click “Add”. Then this new
authentication will be added into the authentication client table below. If
you find any typo before adding it and want to retype again. Just click
“Reset” and “Client IP ”, “Secret Key” and “Re-Type Secret” fields will be
cleared.