ConnectGear WA540G - Manual (Page 5)

Introduction
4
Ÿ Antenna Connector
This round connection is standard Reverse SMA connector where any antennas
with Reverse SMA connector can connect to the Access Point.
Ÿ DC Adapter Port
Insert the power jack of the power adapter into this port.
Ÿ LAN Port
The Access Point’s LAN port is where you connect to your LAN’s network
devices.
Ÿ Reset
The Reset button allows you to do one of two things.
1) If problems occur with your Access Point, press the reset button with a
pencil tip (for less than 4 seconds) and the Access Point will re-boot itself,
keeping your original configurations.
2) If problems persist or you experience extreme problems or you forgot your
password, press the reset button for longer than 4 seconds and the Access
Point will reset itself to the factory default settings (warning: your original
configurations will be replaced with the factory default settings).