ConnectGear WE320 - Manual (Page 12)

7
3 Configuration Utility
The Configuration Utility is a powerful application that helps you configure the Wireless LAN
Cardbus Adapter and monitor the link status and the statistics during the communication
process.
This utility can be used to change the following configuration parameters when the device is
active.
3.1 Connect to the Wireless Network
From the “Connect to Wireless Network” screen you are able to view available wireless
networks within range of your computer and access to the network you intend to.
Parameter Description
Available Wireless Netowrks This list shows all available wireless network within range of your
computer. If you want to connect to any network on the list, select
the network and click “Connect” button.
Network Key If the network is required for Wired Equivalent Privacy (WEP) key,
type the key in the text box. The key should be 10 or 26
hexadecimal characters according to the WEP mode setting (64-
bit or 128-bit) of the network.
Confirm Network Key Enter the same network key again to cofirm the key.
Advanced Button To configure additional wireless network setting, review the link
status and statistics or if you have difficulty connecting to a
network, click “Advanced“ button.