ConnectGear WE320 - Manual (Page 18)

13
Parameter Description
Preamble Mode The preamble defines the length of the CRC block for
communication among the wireless stations. There are three
mode including Long, Short and Auto. High network traffic areas
should use the shorter preamble type. If “Auto“ mode is selected,
the adapter will auto switch the preamble mode depending on the
wireless stations which the adapter is connecting to.
Note that the parameter is only active in the Ad Hoc operation
mode.
Show Icon in System Tray Enable or disable the icon shown in the system tray.
Radio Off When the setting is checked, the wireless connection of the
adapter will be disabled.
Power Save
•
CAM(Continuous Access Mode) – Adapter will always set in
active mode.
•
Max – Enable the adapter in the power saving mode when it is
idle.
•
Fast – Enable the adapter in the power saving mode when it
is idle, but some compoents of the adapter is still alive. In this
mode, the power consumption is larger than “Max“ mode.
Rescan Button Click this button to scan the wireless network which the adapter is
connecting to.
3.4 Status
This screen shows the information of manufacturer, driver version, settings of the wireless
network the adapter is connecting to, linking time and link status. If you don’t ensure the
status of the adapter and the network you are connecting, please go to the screen for more
details.