Install weight plates – Cybex 8800 Bravo User Manual

Page 12

Advertising
background image

12

Cybex Owner’s Manual

If

Then

If machine needs

weight stacks

removed before

moving to desired

location.

5. Repeat procedure for opposite guide rods.
6. Remove spiral pin securing cable end to top weight using a 3/16”

pin punch and hammer.

Top Weight

Connector

Roll

Pin

Pulley Bracket

Cable

7. Remove lifting post.
8. Remove weight plates
9. Move machine to desired position.
10. Remove the four shipping cones using a 3/4” socket or wrench.
11. Attach foot pads to each foot of frame.

Install weight plates

1. Install individual weight plates one at at time.
2. Position each weight plate so wide edges of bushings face upward and narrow edges

of bushings face downward.

CORRECT

Wide bushing

edge faces upward

The narrow bushing edge

must face downward.

WRONG

3. Install lifting post.
4. Snap guide rods into position.

Advertising
This manual is related to the following products: