Cybex 11040 Eagle Leg Press - Manual (Page 15)

15
Cybex Owner’s Manual
Install back shrouds
1. Place shroud back into position on the two bottom screws.
Screw
2. Install the top two screws securing the back shroud.
Screw
3. Install the three Phillips head screws securing the top (back) shroud.
Phillips Head
Screw (3)
Install weight plate decals
You have the option to use pounds, kilograms or both.
1. Slowly and carefully peel off back side of decal, making sure that the decals remain attached to
the front sticker.
Front
Back