Assembly, Machine specifications, Tools required – Cybex 16211 Plate Loaded Seated Calf User Manual
Page 10: Assembly procedure
10
Cybex 16211 Seated Calf Owner’s Manual
Assembly
Machine Specifications
Seated Calf- Product No .16211
Total Weight and Size
Weight: 147 lbs. Size: 30” W x 58” L x 39” H
Weight: 87 kg. Size: 76 cm W x 147 cm L x 99 cm H
Tools Required
• 3/4” Wrench
Assembly Procedure
Move to desired location
1 . Remove shrink wrap securing rubber feet to frame.
2 . Remove each standard cone-shaped shipping support using a 3/4” socket or wrench.
3 . Place rubber feet on each foot of the frame.
Securely anchor machine to the floor
Cybex strongly recommends to maximize stability, equipment must be secured to a solid level
surface.
CAUTION: Cybex is not responsible for the actual anchoring of equipment. Consult with
a professional contractor..
WARNING: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2
bolts or better).
WARNING: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim
any leg or frame not in contact with surface using flat washers.