D.T. Systems H2O 1810 - Manual (Page 10)

10
Transmitter Indicator Light
When one of the push button switches on the
transmitter is pushed, the RED light will turn on to
indicate that the transmitter is being operated. When
the battery needs charging the RED light will blink
once every 1/2 second while holding the continuous
stimulation button.
Intensity Selection Dial
The intensity selection dial allows
you to choose between sixteen
different levels of stimulation,
allowing for very precise control.
PARTS & FUNCTIONS CONT.
Transmitter Antenna
Be very careful when screwing the 4” antenna into the
transmitter. Hand tighten only. Over tightening could
cause damage to the antenna or the antenna mount.
Momentary and Continuous Stimulations
Pressing the upper button causes the collar to
administer a Momentary Stimulation or ‘Nick’.
Pressing the lower button gives the Continuous
Stimulation. These two buttons are the same on
every model of the H
2
O series.
Multiple Dog Model Selection Switch
(H
2
O 1812/1813/1822/1823/1832/1833/1852/1853)
Switching between units can be controlled by moving
the toggle selection switch to the desired unit.