Daktronics 2000 Rodeo OmniSport - Manual (Page 35)

Rodeo Timer Operations 27
Auto Horn
Display Action
Press [AUTO HORN] followed by a number key:

Press [1] to enable auto horn. The horn will sound when
the default horn time is reached.

Press [2] to disable auto horn. The horn will sound only
when [HORN] is pressed.
Note: Auto horn is always disabled in Automatic Timing mode.
Horn
Press [HORN] to manually sound the horn.
Set Default Horn Time
Display Action
MM:SS = minutes, seconds
Press [SET DEFAULT HORN TIME], enter the time to elapse
before the main horn sounds, and then press [ENTER].
Set the Warning Horn Time as desired (for Cutting and Penning)
and then press [ENTER].
The default horn time will be shown on the main LCD screen.
Note: In Automatic Timing mode, the horn time will show
“MAN” for Manual (the horn only sounds by pressing [HORN]).
In Scored Events mode, the timer will automatically stop when the
default horn time is reached.
Scored and Timed Events modes have separate horn times, and
these values are saved when the console is powered down.
Scoreboard On/Off
Press [SCOREBOARD ON/OFF] to quickly toggle the scoreboard output on or off.
Paper
Press [PAPER] to advance the printer paper by one line.
SET DEFAULT HORN
TI ME MM:SS *
AUTO HORN- ON
SEL- 1=ON 2=OFF