Daktronics BB-114 Portable LED Basketball Scoreboard - Manual (Page 14)

8 Mechanical & Electrical Installation
The display is also equipped with a 4-pin XLR jack to connect the All Sport 100 hand-held
controller to the BB-114 scoreboard only (Figure 5).
1. Plug the 4-pin end of the control cable into the XLR J32 jack at the rear of the BB-114.
2. Plug the other end of the control cable into the 9-pin jack on the top of the controller.
The XLR cable transmits both signal output to the scoreboard and power input to the control
console. Extension XLR cables are available from Daktronics.
Figure 5: All Sport 100 Setup