Daktronics Pro Series Quick Start Manual - Manual (Page 10)

TEACH DOWN SCREEN
TEACH UP SCREEN
Touch the motor name in the Old Order
that will be first in the New Order.
To return an item to the Old Order list,
touch its name in the New Order list.
4
1
2
3
5
6
7
13
10
8
9
11
12
BATTEN SETUP
1. Lower the batten until it is at a
comfortable height. Tie curtain or
scenery to batten.
2. Move the batten up until the
attachment is just off the floor.
Touch SET LOWER LIMIT.
3. Move the batten up until it is at
the highest point. Touch SET UPPER
LIMIT.
4. Set the maximum speed of the
batten using the slider.
5. Touch SET SENSITIVITY and
enter a number from 0 to 100
using the keypad. You are ready to
teach the i-Batten safety system.
6. Touch the ENABLE button to
activate the i-Batten feature on the
Batten Setup screen.
7. Touch TEACH DOWN.
8. On the search screen, touch
TEACH DOWN, batten will move
to the lower limit.
9. When the batten stops,
touch CONTINUE.
10. On the Batten Setup
screen, touch TEACH UP.
11. On the teach screen, touch
TEACH UP. The batten will
move to the upper limit.
12. When the batten stops,
touch CONTINUE.
13. Touch CONFIRM to
complete.
14. Rename motor (if
necessary) and confirm.
15. Continue to main screen.
Warning:
The i-Batten logo flashes
to show it is bypassed
during setup.
Follow the instructions to
display Batten Setup screen.
Expand
the
motor
list.
Touch a
motor.
Touch
CONFIRM.
Touch
BATTEN
SETUP.
MOTOR RESTRICT
The Motor Restrict module displays the restricted motors in red and the
enabled motors normally. Select a motor by touching its name in the list.
The options for the motor are dependent on its current status.
Order Motors
Touch ORDER to change
the sequence in which the
motors are displayed.
Two lists are shown: the
Old Order list and the New
Order list (which is blank at
the opening).
B
A
TT
EN SE
TU
P / M
O
TO
R R
ES
TR
IC
T
If the motor is enabled...
...the only option will be to disable it.
If the motor is disabled...
...the only option will be to enable it.