3 networking example, Networking example – Devolo dsl+ 1100 duo User Manual
Page 17
|
Connection and installation
17
|
devolo dsl+ 1100 duo
|
b
if IP addresses are to be assigned dynamically:
ć
auto eth0
ć
iface eth0 inet dhcp
b
if IP addresses are to be assigned statically:
ć
auto eth0
ć
iface eth0 inet static
ć
address 192.168.0.1
ć
netmask 255.255.255.0
ć
gateway 192.168.0.253 (only required for Internet access)
The file /etc/resolv.conf must be edited to ensure that the name resolution
(DNS) is executed correctly. Enter the IP address for the DNS server into this file,
e.g. nameserver 192.168.0.253 (only for Internet access)
Make sure that the IP address is the same as that for the dsl
+
1100 duo. In most
cases the network router is the DNS server.
Please note that operating multiple network interfaces can potentially cause
problems with DNS and routing. We recommend the use of DHCP for the assign-
ment of IP addresses so that the DNS and gateway are adapted automatically.
2.3
Networking example
Networking of two workstations via Ethernet and USB; Internet access via the
dsl
+
1100 duo
Information for the configuration of the dsl
+
1100 duo is available in the follow-
ing chapter Router configuration.
via USB
via Ethernet
devolo dsl
+
1100 duo