DFI OT905-B series - Manual (Page 33)

www.dfi .com Chapter 4 BIOS Setup
33
Chapter 4
PCI Subsystem Setting
This section is used to configure the PCI subsystem setting.
ACPI Power Management Configuration
This section is used to configure the ACPI Power Management.
Enables or disables BIOS
ACPI Auto Confi guration.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
ACPI Power Management Confi guration
Enable ACPI Auto Confi guration
ACPI Sleep State
Resume by PME
Wake system with fi xed time
Restore on AC Power Loss
Advanced
[Disabled]
[S3 (Suspend to RAM) ]
[Disabled]
[Disabled]
[Power Off]
ACPI Sleep State
Selects the highest ACPI sleep state the system will enter when the Suspend button is
pressed.
S1(POS) Enables the Power On Suspend function.
S3(STR) Enables the Suspend to RAM function.
Resume by PME
Enable this field to use the PME signal to wake up the system (via PCIE and onboard
(LAN).
Wake System with Fixed Time
Enable or disable system wake on alarm event. When enabled, system will wake on the
hr::min::sec specified.
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
In case of multiple option
ROMs (Legacy and EFI
Compatible), specifi es
what PCI Option ROM
to launch.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
PCI Option ROM Handling
PCI ROM Priority
Advanced
[Legacy ROM]
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit