Bios setup – DFI HR900-B User Manual
Page 40
40
3
BIOS Setup
ACPI Settings
This section is used to confi gure the ACPI settings.
Enables or Disables BIOS
ACPI Auto Confi guration.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
ACPI Settings
Enable ACPI Auto Confi guration
ACPI Sleep State
Resume by PME
Resume by RTC Alarm
Advanced
[Disabled]
[S3 (Suspend to RAM) ]
[Disabled]
[Disabled]
ACPI Sleep State
Selects the highest ACPI sleep state the system will enter when the Suspend
button is pressed.
S1(POS)
Enables the Power On Suspend function.
S3(STR)
Enables the Suspend to RAM function.
Resume by PME
Enable this fi eld to use the PME signal to wake up the system (via PCI, PCIE,
onboard LAN and PS2 KB/MB).
Resume by RTC Alarm
When Enabled, the system uses the RTC to generate a wakeup event.
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3:
Optimized Defaults
ESC: Exit