DFI QB701-B - Manual (Page 14)

14
2
Hardware Installation
System Memory
Important:
Electrostatic discharge (ESD) can damage your board, processor, disk
drives, add-in boards, and other components. Perform installation proce-
dures at an ESD workstation only. If such a station is not available, you
can provide some ESD protection by wearing an antistatic wrist strap
and attaching it to a metal part of the system chassis. If a wrist strap
is unavailable, establish and maintain contact with the system chassis
throughout any procedures requiring ESD protection.
DDR2
The system board is equipped with memory down (single 32-bit channel) that
support DDR2.
DDR2
DDR2
DDR2