DFI QB701-B - Manual (Page 20)

20
2
Hardware Installation
Installing QB701-B Series onto a Carrier Board
1. The photo below shows the locations of the mounting holes and the bolts al-
ready fi xed in place.
Important:
The carrier board used in this section is for reference purpose only and
may not resemble your carrier board. These illustrations are mainly to
guide you on how to install QB701-B Series onto the carrier board of
your choice.
2. Grasping QB701-B Series by its edges, insert it into the carrier board, and
you will hear a distinctive¨click¨ indicating QB701-B Series is correctly locked
into position.
Mounting hole
QB701-B Series
Carrier board
Standoff Bolts