Digi-Star ERM-2.4 - Manual (Page 2)

ERM-2.4 Operators Manual
2
INTRODUCTION
Thank you for purchasing the ERM-2.4 External Radio MODEM. This
device allows you to add radio capability to any indicator with a J905 port
for communicating to devices such as the Cab Control 2.4. The easy
installation of the ERM-2.4 makes it a seamless process to configure your
indicator to be used as a wireless device. Simply plug the ERM-2.4 into the
J905 port, turn on the External Radio setting in Menu 2, configure the radio
channel
and you’re ready to go!*
* Indicator must have 8J or newer software installed.