Digi-Star Cab Control 2.4 - Manual (Page 7)

Operators Manual
D3990 5
Changing Scale Number on Indicator
NOTE: Perform this process on the indicator front panel (Do
not use Cab Control 2.4).
1. Enter the Long Form Setup by holding [Net/Grs] and
[On].
2. Press [Net/Grs] or [Select] to advance to .
3. Press [On] to advance to
.
4. Press [Net/Grs] or [Select] to set to .
5. Press [On] to save setting and advance to .
6. Press [Net/Grs] or [Select] to set to desired scale.
7. Press [On] to save setting and advance to end of
menu.