Digi-Star EZ 3600 USB Manual - Manual (Page 21)

Advanced Commands
D3842 Rev B EZ3600 User’s Manual 17
Re-Use Recipe/Pen Data
1. Indicator .
2. Press and hold .
3. Press , while holding
indicator scrolls:
On=Clear Clear=Reuse
Net=exit
.
Release .
4. Press again to re-use
recipe and pen data.
Note
: When re-using data stored in indicator, it takes recipe and pen
information and removes completed weights loaded or unloaded and
marks them undone. It will not accumulate data day to day. Download data
to USB Drive before re-using recipe and pen data stored.
Note:
For continuous re-use, set D.A.N.
466
to on. See page 37.
Mix Timer
The mix timer allows the operator to
set a timer to alert the operator
when the mixing is completed. This
can be manually entered or entered
as part of the recipe using the TMR
TRACKER or other software
package.
1. Press .
2. Use the numeric keypad to
enter the amount of time.
3. Press .
4. The Mix Timer will begin to
count down. When it reaches
zero, the alarm light and buzzer
will turn on.
5. Press to enter the
weighing mode.
6. Press the or key to re-
enter the batching mode.
1
2
3
4
Clear
3
1
3
2
4
5
6
6