Digi-Star EZ 3600 USB Manual - Manual (Page 25)

Commonly Used Direct Access Numbers (D.A.N.)
D3842 Rev B EZ3600 User’s Manual 21
Auto Advance
Allows hands free operation of programmed recipes. When auto advance
feature activated, indicator automatically advances to next ingredient once
tolerance, and delay time requirements met.
Tolerance
Sets Auto Advance to trigger prior to
reaching preset weight by weight or
percentage.
1. Enter 442 and press .
2. Press to choose tolerance
method.
3. Press to save.
4. To change percentage, press
until desired value is
shown. To change weight, enter
value.
5. Press to save.
NOTE
: OFF setting always
advances after preset amount
reached.
Example: Preset = 1000 lbs. If
tolerance is set to 5%, Auto
Advance will activate at 950 lbs or
95% of preset weight.
.
Pen Tolerance
Available in List Mode Only 1. Enter 462 and press .
Press again to choose
weight or percent.
2. Press , screen will display
“
pentol
”.
3. Enter weight or percentage
desired.
4. Press .
442
1
2
1
1
2
3
462
1
4