Digi-Star DTU - Manual (Page 4)

DTU Software
D3912-GB Rev A DTU Software manual 1
DTU Software general
The DTU software allows you to send data from your Digi-Star indicator to your PC. The DTU
software can work with all Digi-Star communication devices (DataKey, DDL module and Memory
Card). It also allows you to connect your indicator directly to you PC and receive streaming data or
send commands.
Follow the installation instruction on Page: 2. Select the communication device that you use and
follow the manual instructions. Check the indicator manual for the data and print formats that you
can send to your PC.
Minimum System Requirements
Make certain that your system includes the following hardware and software. These are
the minimum system requirements to run DTU
• A Pentium
 100 or better PC
• Microsoft Windows 95/98 and higher
• 100 Meg Free disk space
• 32 Meg Ram
• CD Drive
• A serial port*/USB to serial Adapter
• Printer
• Internet connection