Digi-Star Diet Manager Set-up & User Guide - Manual (Page 11)

Diet Manager
D3651US-D 7
Load Size –Maximum amount that can be loaded for each recipe. This number needs to be accutate to
prevent overloading the feed mixer.
Moving to Other Wagons – To move between different wagons, click the Next and Previous buttons.
When complete, click Save to save your settings.
Select Wagons for Specific Corrals (Zone Option)
Select the Zones for the wagon that is
assigned to unload to certain corrals
Keep in mind of what zone number that a
corral has assigned to it.
Entering/Updating Operators
Select the Operators tab, or from the
Main Menu, select Files, Operators.
Enter the Operator name in the entry field.
Enter an Operator ID in the entry field.
Up to 5 operators can be entered. When
complete, click Save.
Note: The Operator ID should match the ID
entered at the EZ3500. To make this as
easy as possible, assign a single
numerical to each Operator.
Sending Feed Data
Loads Mode
Select a Feeding
Select the Feeding to send. One
feeding at a time may be sent or
select All Feedings to send all
feedings at once.