Digi-Star Diet Manager Set-up & User Guide User Manual
Page 7
Diet Manager
D3651US-D
3
Note: List Feed Type is also used for recipes only and pens only.
RF Datalink: Feeding data is sent to RF Datalink.
Enter the Program Serial Number
After selecting the program language, enter the 6 digit serial number of
the program “from the CD”. Click Ok when done.
Select the Decimal Separator
Select the Decimal Separator and click Save.
This selection is for types of currency separators.
Select the Currency Symbol
Select the Currency Symbol and click Save
.
Find Comm
After installation of the software, the first time you run the Diet Manager program, the Find Comm
program will automatically run. This program is designed to find the working comm. port and data transfer
device used with your system.
After clicking on Start, the program will begin searching for a working comm. Port and DataKey™. This
search can take up to several minutes. After finding the comm. port and device, the program will update
the Diet Manager program and start the program.
A working DataKey
™
must be inserted in the DataKey
™
Docking Station.
Select the Date Format
Select the Date Format you wish to use and click Save.
Note: The selected Date Format should match the Date Format of the EZ3500 Indicator.
Select Weigh Mode
Select your Weigh Mode and click Ok.
Note: The values entered will not convert if mode is changed later.
Recipe Build Mode
Select how to build the recipes. Either by weight per head or percent of each ingredient