Digi-Star EZ 2000/V - Manual (Page 5)

Digi-Star Model EZ2000/EZ2000V 2. System operation
3
TO SELECT GROSS MODE GROSS mode displays the weight change
since the unit was last Zero/Balanced.
Press .
! The scale is in GROSS mode if there is a
flashing arrow ( % ) pointing toward the word
Gross, next to the display.
TO SELECT NET MODE NET mode displays the weight change after a
TARE has been performed. TARE creates a
temporary zero at that weight value.
Press to set a temporary "zero" point and
enter the NET mode.
or
if in GROSS mode, press
.
The NET/GROSS key is an alternating action key.
If the scale is in the GROSS mode, pressing the
NET/GROSS key will place it in the NET mode. If
the scale is in the NET mode, pressing the
NET/GROSS key will place it in the GROSS mode.
If the TARE function has not been previously
performed, the unit will stay in the GROSS mode
and the message FOR NET MODE PRESS TARE will scroll
across the display.
! The scale is in NET mode if there is a flashing
arrow ( % ) pointing toward the word Net, next to
the display.
TO SELECT HOLD MODE HOLD mode prevents the displayed weight
from changing due to “zero shift” while
moving the scale. Use of this mode is
optional.
Press to "hold" the displayed weight and
enter the HOLD mode.
! The scale is in HOLD mode if the word HOLD is
flashing on the display and the flashing HOLD WEIGHT
is only displayed for a brief time.
9850
%
0
%
HOLD