Digi-Star EZ3400 - Manual (Page 22)

Commonly Used Direct Access Numbers
18 EZ3400 User’s Manual D3714 Rev C
Auto Advance
Allows hands free operation of programmed recipes. When auto advance
feature activated, indicator automatically advances to next ingredient once
tolerance, and delay time requirements met.
Tolerance
Sets Auto Advance to trigger prior to
reaching preset weight by weight or
percentage.
Delay Time
Changes time indicator waits before
automatically advancing to next
feedline.
1. Enter 442 and press .
2. Press to choose tolerance
method.
3. Press to save.
4. To change percentage, press
until desired value is
shown. To change weight, enter
value.
5. Press to save.
NOTE
: OFF setting always
advances after preset amount
reached.
Example: Preset = 1000 lbs. If
tolerance is set to 5%, Auto
Advance will activate at 950 lbs or
95% of preset weight.
1. Enter 443 and press . Enter
delay time in seconds.
2. Press to save.
NOTE:
Set to
0
prevents
automatic advance.
442
1
443
1
2 1
1
2
4
3
5