Digi-Star HORIZON XLS - Manual (Page 9)

Installation
9
1. Ensure the weighing site is level, sheltered from wind and the
weighing platform does not touch the surrounding alleyway.
2. The indicator is supplied with an adjustable bracket.
The bracket has 2 assembly positions to allow different pivot angles.
Use the rear hole if the bracket is mounted at eye height.
Use the front hole if the bracket is mounted at chest height.
For external use it is recommended to mount the bracket at eye
height and to position the screen so it is out of sunlight.
3. The bracket can be mounted to a horizontal or vertical rail using
the U bolts supplied, or it can be screwed directly to a wall or post.
4. Mount the bracket to a rigid structure that doesn't move when the
platform is loaded. This makes the indicator easier to operate.
4. Connect the loadbar connector to the indicator.
5. Connect the external 12v power pack if required.
6. It is recommended to check the calibration of the system using
a known weight.
Rear hole
Front hole