Digi-Star John Deere 1790 - Bauer Series CCS -Refuge Option - Manual (Page 6)

Scale Bracket and Load Cell Mounting Installation
4 John Deere Planter Scale D3860-US – Rev A
SCALE BRACKET AND LOAD CELL MOUNTING INSTALLATION
Front Leg Assembly
1. Weld top base and vertical plate to planter frame if required.
2. Remove the two front leg horizontal 5/8” bolts to the front
leg. Lift the front leg up 3/4”. Assemble the Front Leg
Assembly.
IMPORTANT
: The load cell arrow located on
the end of the FRONT LOAD CELL needs to be pointed
DOWN.
3. Use the 3/4” x 4.0” bolt to secure the load cell to the base
bracket. Pin the load cell to the top bracket with 3/4" x 4.0
clevis pin.
4. Install the existing Front Leg Assembly to the front leg,
using the 5/8” x 3.5” bolt and 5/8” top lock flange nut. Use
the 1/2” x 2-1/4” bolts provided to hold the base bracket
and shim plate to the planter frame. Tighten the base
plate to the planter frame.