DNF Controls Universal Switch Panel (USP-8, USP-8D, & USP-16) - Manual (Page 29)

Universal Switch Panel (USP) User Manual 27 OF 41
I. SYSTEM CONFIGURATION
Use this page to change the IP Address, Subnet Mask, and Gateway
Address for the USP. Also, use this page to install firmware upgrades.
The default IP address is: 192.168.10.217
The default Gateway is: 0.0.0.0
The default Mask is: 255.255.255.0
1) CHANGE IP SETTINGS
a) Click on the System Configuration button. The AUTHENTICATION
WINDOW (log on window) will be displayed.
b) Click in the User Name field and enter the user name, “dnfuser”, using
all lowercase letters. Do not enter the double quotes (“ “).
c) Click in the Password field and enter the password, “controls”, using all
lowercase letters. Do not enter the double quotes (“ “).
d) Click on the OK button to complete the authentication (log on)
process. The System Configuration page will be displayed.
OR
Click on the Cancel button to exit and not access the System
Configuration page.