Service & maintenance, 1 maintenance schedule, Service & maintenance 5 – Echo Bear Cat SC3305 User Manual

Page 16: Warning, Service and maintenance schedule

Advertising
background image

12

3 INCH CHIPPER/SHREDDER

Section

5.1 maINTENaNcE scHEduLE

sERvIcE & maINTENaNcE

5

WaRNING

The items listed in this service and maintenance schedule

are to be checked, and if necessary, corrective action

taken. This schedule is designed for units operating under

normal conditions. If the unit is operating in adverse or

severe conditions, it may be necessary for the items to be

checked and serviced more frequently.
sEE ENGINE oWNER’s maNuaL FoR FuRTHER

ENGINE maINTENaNcE aNd TRoubLEsHooTING

INFoRmaTIoN.

To prevent personal injury or property damage: shut

off engine and make sure that all moving parts have

come to a complete stop before, servicing, adjusting or

repairing. Disconnect the battery and remove ignition

key where applicable.

sERvIcE aNd maINTENaNcE scHEduLE

FREQuENcY

compoNENT

maINTENaNcE REQuIREd

REFER To

ENGINE

opERaToR’s

maNuaL

bEFoRE

EacH

usE

EvERY

8

HouRs

EvERY

25

HouRs

EvERY

50

HouRs

EvERY

YEaR

ENgINE OIl

CHANgE (1)

FuEl FIlTER

REPlACE

SPARK Plug

CHECK CONDITION AND gAP

ENgINE OIl

CHECK/FIll

FuEl TANK

CHECK/FIll

All INTERNAl AND

EXTERNAl NuTS AND

BOlTS

CHECK TIgHTNESS

TIRE PRESSuRE

CHECK

BATTERY CONNECTIONS

CHECK

CHIPPER ANVIl

CHECK ClEARANCE AND RE-TORQuE

TO 75 FT-lBS. (2)

CHIPPER BlADES

CHECK SHARPNESS AND RE-TORQuE

TO 25 FT-lBS. (2)

SHREDDER KNIVES

CHECK CONDITION

ENTIRE MACHINE

ClEAN

DRIVE BElT

CHECK

BElT TENSION

CHECK

BElT/PullEy AlIgNMENT

CHECK

gREASE ZERKS

luBE

WHEEl BEARINgS

CHECK AND REPACK

(1) PERFORM MORE FREQuENTly uNDER EXTREMEly DuSTy CONDITIONS.
(2) PERFORM MORE FREQuENTly WHEN CHIPPINg DRy OR DIRTy WOOD.
As the limited Warranty states, failure by the Owner to perform normal maintenance will void the machine’s warranty. The aggressive, high-speed

nature of chipping REQuIRES THE OWNER TO PERFORM THE ABOVE lISTED NORMAl MAINTENANCE. Special consideration to maintain

and re-torque the CHIPPER ANVIl, CHIPPER BlADES, AND All INTERNAl AND EXTERNAl NuTS AND BOlTS is the sole responsibility of

the Owner. Failure by the Owner to do so shall be cause for denial of warranty.

Advertising
This manual is related to the following products: