Eizo DuraVision FDX1521T 取扱説明書 - Manual (Page 18)

6
Connecting Cables
Attention
• Check that the monitor and the PC are powered off.
• When replacing the current monitor with this monitor, be sure to change the PC settings for resolution and
vertical scan frequency to those that are available for this monitor. Refer to the compatible resolution table before
connecting the PC.
Note
• When connecting multiple PCs to the monitor, refer to the User’s Manual on the CD-ROM.
1.
Connect the signal cables to the input signal connectors and PC.
Check the shape of the connectors, and connect the cables.
After connecting the signal cable, tighten the screws of the connectors to secure the coupling.
DVI
D-SUB
AUDIO OUTPUT
DVI
D-SUB
or
Digital connection
(DVI)
Analog connection
(D-Sub)
Signal cable FD-C39
(option)
Signal cable MD-C87
(supplied)
Stereo mini jack cable (supplied)
CD player, etc
2.
Plug the power cord into a power outlet and the power connector on the
monitor.
Adjusting the Screen Angle
Hold left and right edge of the monitor with both hands, tilt the screen to the best condition for working.
Attention
• Be sure that the cables are correctly connected.