Installing the touch panel driver, Calibrating the monitor – Eizo DuraVision FDX1521T 取扱説明書 User Manual
Page 20
8
Installing the Touch Panel Driver
Attention
• The user account to be used for installing the touch panel driver must have the “Administrators” privilege.
• When reinstalling the touch panel driver to update the driver, etc., restart the PC after uninstalling the driver and
then install it.
1.
Uninstall the other touch panel driver, if it is installed.
2.
Use the USB cable or RS-232C cable to connect the monitor and the PC.
USB
COM
USB Cable MD-C93 (supplied)
or
RS-232C Cable (option)
3.
Install the touch panel driver according to the instructions included in the CD-
ROM.
For details, refer to the Installation Guide for Touch Panel Driver on the CD-ROM.
Calibrating the Monitor
Calibrate the monitor according to the Touch Panel Driver Installation Guide (on the CD-ROM).
Note
• If its installation location has changed, please perform calibration.