Entone Hydra HD A-Series - Manual (Page 17)

Hydra HD – A Series User’s Guide
Copyright     2008 Entone, Inc. All rights reserved . 15
CONNECTING THE PRIMARY TV USING COAXIAL CABLE
1. Use the coaxial cable that comes packaged with Hydra HD to connect your TV’s antenna input to the
Hydra HD’s “TV OUT”.
2. Tune your TV to channel 10 to view the output.
NOTE:
In the “TV OUT”, it is always hooked to decoder 1 and factory set to use channel 10.
To set “TV OUT” to another channel ID, please refer to section Setting Channel ID.
Figure 4-1 Connecting Primary TV using Coaxial Cable