Entone Hydra HD for 3-rd Party Remote Control - Manual (Page 9)

Hydra HD Setup Guide for 3 rd Party Remote Control – 8 – Copyright © 2008 Entone Technologies (HK) Ltd.
V1.2
8. On the TiVo remote, press the following keys in order: THUMBS UP > THUMBS DOWN > PAUSE > PLAY
• You should hear 5 rings when you enter the key sequence above. If you do not hear the rings, enter
the code again.
9. On the Channel Changing Tests screen, you should now see the phrase “Press ENTER for advanced setup”
at the bottom of the screen. Press the ENTER key on your remote.
10. You will now see the Cable Channel Changing Advanced Setup screen. Highlight IR Code and press
SELECT.
11. Enter 10024 for MAGNAVOX IR Code, then press SELECT. Or enter 00092 for CENTURION IR Code, then
press SELECT.