Dual XDM7510 - Manual (Page 6)

6
The clock will display 12-hour AM/PM time in USA frequency
spacing mode (PM 10:00). In European frequency spacing
mode, the clock will display 24-hour time (22:00).
In tuner mode, press and hold DISP then press TUNE
ll
to select function priority display. “FREQ” will momentarily
appear in the display.
Note:
"FUNC" will appear in CD or AUX modes.
Radio frequency (tuner mode), CD elapsed time/track (CD
mode) or AUX (AUX mode) will be displayed by default.
Note:
When playing MP3/WMA files, the track number/elapsed
time, track name, directory name, title, artist, album, year or
comment will be displayed by default. Clock is accessed by
pressing DISP momentarily.
Press and hold DISP then press TUNE nn to select time
display priority. “TIME” will momentarily appear in the
display. Clock will be displayed by default. Radio frequency
(tuner mode), CD elapsed time/track or MP3/WMA file
information (CD mode) is accessed by pressing DISP
momentarily.
Programs unit to display clock/no clock when unit is off.
Press and hold
MODE then press PRESET 1 to select clock
priority on/off. “CLK ON” or “CLK OFF” will momentarily
appear in the display.
Press and hold for more than 2 seconds to RESET the unit
upon initial installation or if abnormal operation occurs. The
reset button is located above the PWR button.
Press and hold AUD for 3 seconds to turn confirmation beep
on/off.
Press MUTE to silence the audio. “MUTE” will flash in the
display. Press MUTE again to cancel.
12/24-hour Clock
Programmable Display
Priority
Programmable Clock
Priority
Reset
Confirmation Beep
Mute
XDM7510 OPERATION
General Operation