Dual XDM7510 - Manual (Page 7)

7
Press AUD to select between Volume (default), Bass,
Treble, Balance & Fader.
Press AUD until BAS appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Press AUD until TRE appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Press AUD until BAL appears then rotate encoder
left/right to adjust (BAL L 12-BAL 00-BAL R 12).
BAL 00 represents equal balance
Press AUD until FAD appears then rotate encoder
left/right to adjust (FAD F 12-FAD 00-FAD R 12).
FAD 00 represents equal fader
Individual Bass and Treble settings are retained in memory
for AM, FM, CD, and AUX modes. This allows you to save
the Bass and Treble settings separately for each mode.
Example:
FM tuner mode can have Bass +3 and Treble -1 while CD
mode can have Bass +2 and Treble +2.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
Audio
Bass
Treble
Balance
Fader
Source Audio Memory
BASS VOLUME TREBLE BALANCE FADER
XDM7510 OPERATION
General Operation