ESI SW10K eXperience - Manual (Page 8)

ESI SW10K eXperience
8
11. satellite crossover control – this allows you to adjust the crossover frequency for the output to
the satellites connected to SW10K eXperience via the XLR outputs (10). Don’t confuse this with
the subwoofer crossover control (4).
4. General Information
Trademarks
ESI, nEar, SW10K and SW10K eXperience are trademarks of EGOSYS, Inc. and ESI Audiotechnik
GmbH. Other product and brand names are trademarks or registered trademarks of their respective
companies.
Correspondence
For technical support inquiries, contact your nearest dealer, local distributor or ESI support online at
www.esi-audio.com.
Disclaimer
All features and specifications subject to change without notice.
Parts of this manual are continually being updated. Please check our web site www.esi-audio.com
occasionally for the most recent update information.
Declaration of Conformity (for the European Union)
The product described in this manual is manufactured in China by ESI Audiotechnik GmbH,
Brennerstraße 48, D-71229 Leonberg, Germany. The product is labelled with the CE mark and
conform to the protection requirements of the European Electromagnetic Compatibility Standards
and Directives. The product is designed and constructed such that electromagnetic disturbances
generated do not exceed levels allowing radio and telecommunications equipment and other
equipment to operate as intended, and, the product has an adequate level of intrinsic immunity to
electromagnetic disturbance to enable operation as specified and intended.
The product is marketed as ESI SW10K eXperience studio monitoring speaker.
With reference to regulations in the directives 73/23/EEC, 89/336/EEC, the equipment listed above
is covered by this certificate and labelled with the CE mark conforms to the following standards:
EN60065 Safety requirements for mains operated electronic and related
apparatus for household and similar general use.
EN55103-1 & EN55103-2 Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use.
This declaration is made by Claus Riethmüller (Managing Director).
_____________________ ______________ ___________________________
City Date Signature
Leonberg, Germany 22.12.2008