Technical data – ESI uniK 08 User Manual
Page 7
ESI
uniK 08
7
Orientation
It’s very important to place the uniK 08 vertically. Never place them horizontally.
Comments
Please also make sure to not place any obstacles that may block the flow of air or that could
generate sound reflections (especially highly reflective material including glass or metal) in front of
the monitor. Also, don’t put plants in pots on top or too close to your monitors. Keep a certain
distance to the wall behind the speaker, as it could block air flow.
4. Technical Data
Please note that technical specifications are subject to change without any prior notice. The specs
given in this manual are up-to-date at the time of the creation of this document.
Specifications
Model: uniK
08
Type:
Biamp 2-Way Powered speaker
System Type:
Active Studio Monitor Speaker
Dimensions (W x H x D):
252 x 352 x 319mm
Weight: 7.9
kg
HF Driver:
Ribbon tweeter Φ49 x 26 mm
LF Driver:
8" kevlar curved cone (magnetic shielding type)
Output Power:
90W (HF: 30W, LF: 60W), 130W AC consumption power
Working Voltage:
AC100-240V 50/60Hz
Frequency Response:
37Hz – 22kHz
Input Impedance:
42kOhm (balanced) / 8.5kOhm (unbalanced)
Crossover Point:
2.4kHz
SPL:
90dB ±3dB @1W / 1M at 300. 400. 500. 600 Hz
Rated Noise Power:
45W (THD=1%, 4ohm load, 1kHz)
Input Sensitivity:
75mV@1W; 485mV@45W (1 kHz)
Input Connectors:
XLR / TS1/4" combo connector, balanced / unbalanced input
Volume Control:
min – 0dB – max
Indicator:
power LED on front panel, blue