ETA Verto - Manual (Page 22)

VI. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal of the product, hand it over at special collection places where it will be received free
of charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Fines can be imposed
for improper disposal of this type of waste in agreement with the national regulations. The
appliance is equipped with the NiMh battery with long life. For environmental protection it is
necessary to remove the battery from the appliance after its service life and the battery and
the appliance must be disposed of safely using special collection networks. Ask for more
details at the local authority or at the local waste collection site.
Removal of the battery
Remove the batteries from the appliance only when they are completely discharged
(i.e. let the vacuum cleaner running until its motor stops). Screw out all bolts and open the
vacuum cleaner. Gradually disconnect the lead–in wires of batteries and remove the battery
(Fig.11).
Replacement of parts that require intervention in the electric part of the appliance
must be carried out by a specialized service! Failure to comply with the instructions
of the manufacturer will lead to expiration of the right to guarantee repair!
VII. TECHNICAL DATA
Type ETA 0442 ETA 2442
Voltage (V) specified on the type label of the appliance
Input (W) specified on the type label of the appliance
Protection class appliance II.
Battery 6V 12V
Noise level dB (A) 72 76
AC adapter 230 V~ / 8 V 230 V~ / 16 V
6 W, 600 mA 6 W, 200 mA
The product has received ES declaration of conformity according to Act as amended.
The product matches the requirements of the below statutory order as amended.
– Committee Regulation No. 2006/95/ES as amended, setting the technical requirements of
the electrical appliance as low.
– Committee Regulation No. 2004/108/ES as amended, setting the technical requirements
of products in terms of their electromagnetic compatibility.
The manufacturer reserves the right to make insignificant changes to the standard
make that do not affect the function.
NOTICE
GB
22 / 34