ETA 0609 - Manual (Page 16)

Set blade wheel B3 to shaft A3 to the maximum position (in type eTA 1609 it should be
blocked with the projections on the shaft). Secure the blade wheel in type eTA 1609 by
screwing matrix B4 anticlockwise. Put front cover B5 to back cover B1, then secure it with
bonding material B6.
Make sure that all the parts fit together and that the fastening matrices are tightened
properly. The blade wheel of the fan must turn freely after assembling the cover and
it must not vibrate when operating.
IV. INSTRUCTIONS FOR USE
Place the assembled fan on a suitable flat surface (see par. I. SAFETY WARNINGS).
Set the direction of air flow by tilting drive unit A2 to the respective position (upwards or
downwards). Plug power cord A7 to an electric socket. On control panel A1 select the
required speed of air flow by pressing the button. The higher number you choose, the
higher the speed of air flow will be.
In type ETA 1609, start the function of the fan turning to the sides by pressing control A5.
You can stop turning in the opposite way (pulling the control out).
In type ETA 0609 the fan turns to the sides automatically after switching on.
Switch off the fan by pressing button 0 on control panel A1. The fan can be held and
carried by handle A6.
Note: If the function of the fan rotation is on, control A5 is turning.
V. MAINTENANCE
Switch off and unplug the appliance from power supply before any maintenance
by taking the plug of the power cord out of the socket! Do not use rough and
aggressive detergents! Carry out surface maintenance only (wipe off dust etc.) Use
e.g. a soft damp cloth for removing old dust of other impurities. dust and impurities settled
inside the fan can be cleaned by vacuuming or blowing out, or disassembling cover B.
Follow the steps on Fig. 1a, 2a when disassembling and assembling the appliance again.
Make sure that all the parts fit together and that the fastening matrices are tightened
properly. The blade wheel of the fan must turn freely after assembling the cover and
it must not vibrate when operating. Store the appliance at a safe and dry place, out of
reach of children and incapacitated people.
VI. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal, hand them over at special collection places where they will be accepted free of
charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Ask for more details at
the local authorities or at a collection site. Fines can be imposed for improper disposal of
this type of waste in agreement with the national regulations.
If the appliance is to be put out of operation definitely, we recommend cutting off the feeder
cable, to disable its use.
16
GB
/ 42