ETA Promise - Manual (Page 21)

III. PREPARATION FOR USE
Remove all packing items and unpack the mixer and its accessories. Remove all possible
adhesion foils, stick-on labels or paper from the appliance. Before using the appliance for
the first time, wash all parts coming in contact with the food in hot water with a suitable
detergent, rinse them thoroughly in clean water and wipe them or leave them to dry.
Use of the individual levels (A2, A3), (pic. 2)
0 – off
1 až 5 – speed selection (use for whisking, mixing, kneading).
MAX – the motor is running at max. power and is in operation the whole time the button
A2 is pressed (for mixing). Submersible blender G may be turned on only with this
button while the speed selector A2 must be in position 0!
Stand (B)
Folding out the bracket - press the B2 button and fold out the bracket B1 (pic. 6). When
folding back the bracket, press the B2 button again and the
bracket will fold back to the stand, arrest itself (a click will sound).
Removing the propulsion unit - by pressing button B3, the arrest will be released
(pic. 4) it is possible to remove the propulsion unit A from
the fold-out bracket B1.
Rotary bowl (D)
Place the rotary bowl in the stand B (Fig. 7). To remove the bowl, follow the above
procedure in the reverse order
Attaching and removing the lid (C)
Put the lid onto the fold-out bracket B1 by sliding the protrusions on the lid into the
protrusion in the fold-out bracket and pushing the lid all the way (pic. 5). Proceed reversely
when removing the container.
Feeding opening cover (C1)
Sliding the cover aside, the feeding opening can be used to add liquid or solid ingredients
in the bowl D while the propulsion unit A is running.
Holder (H)
The holder is deigned to hold the mixer and tools. Fit the holder on the wall using the
supplied dowels and screws. Make sure that there is no electric, telephone, plumbing fitting
under the plaster at the place of mounting the holder.
IV. USING ACCESSORIES
Take please the following tips for examples and inspiration. Rather than giving instructions,
the aim is to show different ways how to process food. The processing times are never
longer than a few minutes. It is advisable to break work from time to time, switch the
appliance OFF (the 0 setting) and clean any sticking food off the tolls or the bowl or lid (see
please I. SAFETY WARNING).
Whipping beaters (E)
Use: to beat or whip egg whites, cream sauces, cream, pastry, puree, etc. Never use the
whipping beaters for mixing tough substances such as yeast dough.
Inserting: their reciprocal position is designated by a symbol on the bottom part of the
propulsion unit (pic. 3). Insert the whisks into respective openings A4 in the
bottom part of the propulsion unit all the way. Release the whisks by pressing
the release button A1 (pic. 2).
21
GB
/ 38