ETA Promise - Manual (Page 23)

(pic. 4) and then push the blender into the protrusion in the bracket all the way
(a click will sound). Slide the lid C on the bracket (pic. 5). Fold out the bracket
B1 (pic. 6) and insert the bowl D into the stand along with the ingredients to be
processed (pic. 7) fold the bracket back only after its arrest has been clicked in.
Storing the appliance and accessories
After finishing work, switch the mixer OFF and unplug the power cord plug A6 off the
mains. Place the mixer A and its accessories E, F, G, I in holder H (Fig. 9).
Store the appliance after cleaning at a dry, dustfree and safe place, out of reach of
children and incapacitated people.
V. MAINTENANCE
Unplug the appliance from power supply by taking the fork of the power cord out of
the socket! Do not use rough and aggressive detergents (e.g. sharp objects,
scrapers, diluting agents or other solvents)! Clean the propulsion unit A with a
damp cloth and soap. Make sure that water does not get to the inner parts. Wash other
accessory immediately after use in hot water with soap, rinse in clean water and wipe dry
(you can use a dish washer - not for blender G). The end with the blender G shaft must not
be immersed during cleaning. Work very carefully when cleaning the blending attachment
G. Pay attention that the cutting edges of the accessories do not come in contact with hard
objects which blunt them and thus decrease their efficiency.
Some additives may cause the accessories to colour. This has no adverse effect over the
appliance operation and any such colouring is likely to disappear with time. Never dry any
plastic parts over a direct source of heat (such as the stove or gas or electric ring).
VI. THE ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste.
For proper disposal, hand them over at the special collection places where they will be
accepted free of charge. Suitable disposal of the product can help to maintain valuable
natural resources and to prevent possible negative impacts on the environment and
human health, which could be the possible consequences of improper waste disposal. Ask
for more details at the local authorities or at a collection site. Fines can be imposed for
improper disposal of this type of waste in agreement with the national regulations. If the
appliance is to be put out of operation for good, after disconnecting it from power supply
we recommend cutting off the power cord and in this way it will not be possible to use the
appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service!
Failure to comply with the instructions of the manufacturer will lead to expiration of
the right to guarantee repair!
23
GB
/ 38