ETA Quatro blade User Manual

Page 19

Advertising
background image

– When the appliance is in operation, prevent pets, plants or insects

to get in contact with it.

– After finishing work and before cleaning, always switch off the appliance and disconnect it

from power supply by taking the power cord connector out of the electric socket.

– The product is intended for home use and similar (in shops, offices and similar

workplaces, in hotels, motels and other residential environments, in facilities providing

accommodation with breakfast). It is not intended for commercial use!

– Do not use the appliance in connection with a programmer, a timer or any other appliance

that switches the appliance on automatically.

– This appliance is not intended for outdoor use.

– Do not use the appliance (container B) without the anti-slip base!

– Do not insert the plug to or take it out of a socket with wet hands and do not pull

the power cord!

– Never immerse the drive unit into water or wash it in running water!

– Check before every connecting of the appliance to power supply if you do not push the

switch in the off position and after completing work always disconnect the appliance from

power supply.

– Use the appliance in the working position only at places with no risk of turning over and

in sufficient distance from heat sources (e.g.

heater, stove, grill, etc.) and wet surfaces

(e.g.

sinks, wash basins, etc.)

– Before preparation, remove possible packages from food (e.g.

paper, a PE bag, etc.).

– It is not allowed to modify the surface of the appliance in any way (e.g.

using

a selfadhesive wallpaper, foils, etc.).

– Use the appliance designed for this type only. Using another appliance can represent

a risk for the operator.

– Do not insert the appliance into anybody holes.

– Do not switch on the appliance without substances put in!

– Do not remove the appliance if the drive unit is in operation!

– Make sure that the power supply cable does not get between the rotating parts of the

accessories.

– The work adapters cannot be exchanged when the drive unit is in operation for safety

reasons.

– Short-time operating. Use the appliance for no longer than 1 minute, and don’t operate hard

food for no longer than 10 seconds.Before you remove the appliance or the drive unit from

the container, let the rotating parts stop completely.

– Before emptying the chopping container, first remove the sickle-shaped knife.

– When mixing, blending, whisking liquids, never put in more liquid than

300 ml and process

the liquids only in the mixing container (Fig. 1 - position

F).

– Do not process food at temperature exceeding

about 80 °C.

– Never

insert e.g. fingers, fork, knife, spatula or spoon into the rotating parts of the

appliance and the accessories.

– Before emptying the chopping container, first remove the sickle –shaped knife.

– Always unplug the appliance from power supply if you leave it unattended.

– If the processed food starts to stick to the appliance (e.g. on

knives, the beater, the

container or the lid), switch off the appliance and clean the accessories carefully (e.g.

using

a spatula).

– Check the condition of the power cord of the appliance regularly.

– Make sure that the power cord does not hang over the edge of the working table where

children could reach it.

19

GB

/ 41

Advertising