Exacq exacqVision IP Camera Quick Start Guide - Manual (Page 16)

www.exacq.com
#500-0024
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 16 of 17
7/15/2014
All Vivotek network cameras in your subnet are displayed. If the program does not detect the camera, verify that the
cameras are actually in your local subnet. Double-click the camera that you want to configure.
Enter the root password for the Vivotek camera. If you have not set up the camera previously, the default password is blank.
Enter in the new root password and keep the default Date/Time settings. Click Next.