Fire Magic DC-WK-03 Island Enclosure Wheel Kit - Manual (Page 2)

REV 1 - 1504090745 L-C2-413 2
WHEN INSTALLING ON AN ASSEMBLED
ISLAND ENCLOSURE
WARNING: Use extreme care when installing this
wheel kit on an existing island that has
already been fully assembled. Use two
or more people when handling the island
enclosure.
1. Remove any appliances, doors, drawers, and
countertop leaving only the island frame fully-
assembled. See Fig. 2-1.
WARNING: Take into consideration any gas supply
plumbing, electrical wires, etc. when
moving/removing these items.
2. Carefully place two 2x4's under the island
enclosure as shown in Fig. 2-2. (Keep clear of
any levelers.)
3. Remove all levelers (see Fig. 2-3) and install the
left wheel assembly to the left side of the enclosure
using the included hardware and a
9 / 16 " open-end
wrench or equivalent (see Fig. 2-4).
Fig. 2-2 Place 2x4's under island enclosure
Fig. 2-3 Remove Levelers
Fig. 2-4 Install left wheel assembly
2x4 2x4
(2x4's not shown)
2x4
Left wheel
assembly
Fig. 2-1 Remove appliances, doors drawers, etc.
DC430 model
shown