Limitorque actuation systems – Flowserve DDC-100 Master Station II User Manual
Page 70
Advertising
70
DDC-100 Master Station II Installation and Operation Manual
FCD LMAIM5001-00
Flow Control Division
Limitorque Actuation Systems
Figure 16-3: Configuration Error 2
Torque information is viewed on the Active processor.
Figure 16-4: Inactivity Timeout
If the Master Station has not been used for a five minute period, the user will be logged out in 60 seconds.
Cancel
Due to inactivity, this
session will logoout in
60 seconds. Press the Cancel
button to continue this
session.
Inactivity Timeout
Configuration Error
Please use the ACTIVE unit to
view torque information.
This unit is configured
in STANDBY mode.
<< Back
Advertising