Flowserve LPS Pneumatic Heavy-Duty Actuator Series - Manual (Page 10)

LPS Series Heavy-Duty Actuators FCD LFENIM0001-02-AQ – 5/15
10
1.10 Valve and Actuator Variations
These instructions cannot claim to cover all details of all possible product variations, nor can they provide informa-
tion for every possible example of installation, operation or maintenance. If there are any uncertainties in this respect
particularly in the event of missing product-related information, clarification must be obtained via the appropriate
Flowserve sales office.
1.11 Unpacking
1.11.1 Each delivery includes a packing slip. When unpacking, check all delivered actuators and accessories using
this packing slip.
1.11.2 Report transportation damage to the carrier immediately.
1.11.3 In case of discrepancies, contact your nearest Flowserve location.
1.11.4 If necessary, retouch minor damage to the paint coating which may have occurred during transport or
storage.
NOTE: Ensure that the addendum “ATEX/PED/Machinery Directive Manual” accompanies this manual, when the
actuator is under one (or more) of the following European Directives:
• 2006/42/EC - Machinery Directive
• 94/9/EC - ATEX Directive
• 97/23/EC - PED Directive
If “ATEX/PED/Machinery Directive Manual” is not in your hands, contact Flowserve.
NOTE: When the actuator has SIL requirements according to IEC 61508, ensure that the “LPS Series Functional
Safety Manual” accompanies this manual and is referred to for equipment usage.