Dolby Laboratories DP564 - Manual (Page 17)

DP564 Multichannel Audio Decoder Installation
2-3
2.2.3 Analog Outputs
The +4 dBu balanced
Analog Audio Outputs
connect directly to your monitoring
system. Each connector is labeled according to the channel signal it sends.
If your system includes a single speaker for Back Surround, use only the
Bsl
output,
and leave the
Bsr
output open.
2.2.4 Power
The main fuse rating is:
T 1A L (1 amp, 250 V, 20 mm, time-lag, low breaking capacity) for all operating
voltages.
WARNING: Before applying power, check the main fuse using the procedure on
page ix.
There is no power switch on the DP564. To apply power, connect the power cord to a
live outlet.