Dolby Laboratories DP564 - Manual (Page 69)

DP564 Multichannel Audio Decoder Streaming Server and Remote Software
8-3
8.6 Streaming
The Streaming tab enables you to select and control the streaming input. This
functionality includes:
• Server location
• File selection
• Play, Pause, and Stop control
• Slide bar control for locating starting positions within a file
• +10 Seconds / –10 Seconds buttons
8.6.1 Server Location
Select the server location by selecting the server name on the local area network
(LAN) that contains the Dolby
®
Digital (.ac3) files you wish to play. This gives you
access to the files on that server in the file selection window.
8.6.2 File Selection
When the Server location is set to a computer or network that contains the Dolby
Streaming Server program, the file selection window allows you to select a file to be
played back via the streaming input. The DP564 only recognizes files that are stored
in the directory defined when you install the Streaming Server program.
8.6.3 Play, Pause, Stop Control
Click Play to play the selected file. The Streaming Server takes approximately 3
seconds to buffer the file before beginning to play. Pause pauses play while
maintaining the file in the buffer, to allow quicker resumption of play. Stop ends play
mode, and returns the slider to the beginning of the file.
8.6.4 Slide Bar Control
The slide bar control allows you to select a play point within the file by clicking and
dragging the slider.
8.6.5 +10 Seconds / –10 Seconds Buttons
These buttons allow you to advance or back up the play point of the file in ten-second
intervals.