Flowserve MX Dashboard Limitorque - Manual (Page 8)

8
FCD LMENIM2338-01
The Dashboard offline mode allows the user to configure the
MX/QX configuration prior to the system upload. The user is
allowed to change parameters associated with a standard
MX/QX configuration such as REMOTE mode, LOCAL mode,
ESD, etc. Factory-set parameters: VOLTAGE, FREQUENCY,
UNIT SIZE, UNIT SPEED, LIMIT SWITCHES are not configurable
using Dashboard, thus allowing the user to upload a desired
configuration to similar installed MX/QX’s without the risk of
altering factory-set “as built” configuration.
To access the offline mode, perform the following as illustrated:
The “Offline Mode” must be checked.
• Once the “Offline Mode” is selected, the “GO” button will
activate. Select and proceed to page 9.
Dashboard offline Mode