Annex – Flowserve NRS 2-4 User Manual
Page 13
13
After switching on the mains voltage the LED is not illuminated
Fault:
The mains voltage is not applied across the equipment.
Remedy: Apply mains voltage. Check installation of the 19" slide-in unit.
Annex
Fault finding list
Warning
The terminal strip of the NRS 2-4 is live during operation. This presents the
danger of electric shock.
Cut off power supply before inserting or removing the 19" slide-in unit and
before undertaking any installation or maintenance work.
B
We hereby declare that the equipment NRS 2-4 conforms to the following European
guidelines:
n
LV guideline 73/23/EWG version 93/68/EWG
n
EMC guideline 89/336/EWG version 93/68/EWG
which are based on the following harmonised standards:
n
LV standard EN 60947-5-1: 1991
n
EMC standard EN 50 081-2, EN 50 082-2
This declaration is no longer valid if modifications are made to the equipment without
consultation with us.
Declaration of conformity
Bremen, 28th April 1997
GESTRA GmbH
Dr. Anno Krautwald
Dr. Christian Politt